Start with the games and the available space
A home arcade cabinet should be designed around the games it will play, the people who will use it and the room where it will stand. Starting with the cabinet shape or the largest screen available often creates avoidable problems. A control panel that works well for a classic joystick game may be uncomfortable for a driving simulation, while a screen chosen for modern games may display older content with the wrong proportions.
Make a short list of the intended game types before buying components. A cabinet focused on two-dimensional arcade games may need a joystick and several action buttons for each player. A machine intended for fighting games benefits from clearly separated controls and consistent button spacing. A driving setup requires a wheel, pedals and a different seating position. A general-purpose cabinet can support more genres, but every additional control increases cost, wiring work and the chance of a crowded panel.
Measure the room, including the route through doors and narrow passages. A cabinet may fit against a wall but still be difficult to move into position. Leave enough clearance to open the rear service panel, reach the power switch and clean the screen. Also consider nearby furniture, ceiling height and whether players will stand or sit.
- Choose the main game categories before choosing controls.
- Decide whether the cabinet is for one player, two players or occasional multiplayer use.
- Measure the footprint, height and depth available in the room.
- Plan how the cabinet will be transported, assembled and serviced.
Choose a cabinet format that suits the room
Several cabinet formats can work in a home environment. An upright cabinet provides a familiar standing experience and can include a generous control panel, but it occupies more vertical and floor space. A bartop cabinet is smaller and easier to move, although it usually needs a table or stand and may offer less room for two players. A sit-down cabinet can be comfortable for longer sessions, but its construction becomes more complex because the seat, legroom and screen angle must work together.
A wall-mounted or compact cabinet can be useful where floor space is limited. It must be securely fixed to a suitable structure and designed so that the controls do not place excessive force on the mounting points. A foldable or modular design can simplify storage, but moving parts need careful alignment and protection for cables.
Think about the cabinet as three functional zones. The upper section holds the display and sometimes speakers. The middle section contains the controls and any bezel or marquee. The lower section houses the computer, console, power equipment and ventilation openings. Separating these areas helps with maintenance and reduces the risk that heat or loose cables will interfere with controls.
Do not make the cabinet permanently closed before testing the main components. A temporary mock-up made from cardboard, scrap wood or a simple frame can reveal whether the screen is too low, the panel is too deep or the player positions are too close together. This test is particularly valuable for a two-player layout.
Select a screen for image shape, viewing angle and serviceability
The screen is not only a visual component. Its aspect ratio, mounting method, viewing angle and access for repairs all influence the cabinet design. Older arcade games commonly use a more square image area, while many modern games are designed for a wide screen. Matching the display to the main library avoids excessive unused space or unwanted image stretching.
A flat-panel display is usually easier to install than a heavy older display and creates fewer structural demands. Check the panel’s physical dimensions rather than relying only on its diagonal size. The outer frame, mounting points and control buttons can affect how it fits behind a bezel. Some displays have a visible frame that is too wide for a tightly designed cabinet.
Image latency can matter for games that depend on precise timing. Manufacturers describe display performance in different ways, so specifications should be compared carefully rather than judged from a single advertised response figure. The signal path also matters. An additional converter, receiver or poorly configured video setting may introduce delay.
Use the screen’s native shape whenever possible. If older games are displayed on a wide panel, preserve their original proportions rather than stretching the image across the entire screen. A border or themed bezel can fill unused space without distorting graphics. Vertical games may require a rotatable display, but the mounting system must hold the screen securely in both orientations and allow the cable to move without strain.
| Screen priority | Practical design question |
|---|---|
| Aspect ratio | Will the main games use a square, traditional arcade shape or a wide modern shape? |
| Viewing angle | Will standing players see the image clearly from the intended positions? |
| Mounting | Can the display be fixed securely without blocking ventilation or controls? |
| Maintenance | Can the screen be removed without dismantling the entire cabinet? |
| Signal path | Are the computer, cables and adapters compatible with the chosen resolution and input? |
Design controls around player movement
The control panel is the part players touch most, so comfort and clarity should guide every decision. A joystick should have enough room for the hand and should not be positioned so close to the screen edge that the wrist is forced into an awkward angle. Buttons need enough separation to identify them by touch, particularly when two players share the same panel.
For a two-player cabinet, mirror the basic layout only when the games justify it. Some players prefer a symmetrical arrangement, while others need a staggered layout to reduce contact between hands. The center of the panel should not become a collision zone. Leave space between the two main control groups and keep secondary buttons away from the areas used during rapid play.
Different control types have different installation requirements:
- Joysticks: Check the mounting depth below the panel, the shaft length above it and the direction of the microswitches or sensors.
- Action buttons: Confirm the hole diameter, panel thickness and clearance beneath the surface before drilling.
- Start and service buttons: Place them where they are accessible for setup but unlikely to be pressed accidentally during play.
- Trackballs: Allow space below and around the mechanism, as well as a surface that can withstand repeated movement.
- Rotary controls: Plan for their encoder, wiring and the hand movement required by the selected games.
- Special controls: Wheels, pedals, light guns and flight controls usually require a dedicated mounting solution rather than a universal panel.
Use paper templates for every component. Place the templates on the proposed panel and simulate the reach for both players. This method can expose interference between joystick bodies, button nuts, wiring connectors and support rails before any material is cut.
Plan the layout for standing and seated play
Ergonomics depend on the relationship between the floor, control surface, screen and player’s line of sight. A standing cabinet should allow the player to approach without hitting the lower front section with the knees or feet. The panel angle should support the hands without forcing the shoulders upward. A seated cabinet needs sufficient legroom and a seat position that does not place the player too close to the screen.
Screen tilt is a design choice rather than a decoration. A slight backward angle can reduce reflections and improve visibility for standing players, but excessive tilt may make the upper part of the image harder to see. Check the screen from the actual player positions, not only from directly in front of the cabinet.
Controls for younger players may be easier to reach on a lower or separate panel, but changing the entire cabinet height can compromise adult comfort. A removable stool, adjustable seat or dedicated compact control station may provide more flexibility. Any seating should remain stable when players operate controls quickly.
Pay attention to edges and corners. Round or carefully finished edges reduce the chance of bumps and make the cabinet more comfortable during longer sessions. Fasteners should be countersunk or covered where appropriate, and no screw, cable tie or metal bracket should project into a hand or leg area.
Organize wiring, power and ventilation before closing the cabinet
Good internal organization makes a cabinet safer and easier to repair. Separate low-voltage signal cables from mains power wiring where practical, use strain relief at entry points and label connectors before final assembly. A wiring diagram can save time when a button stops responding or a component needs to be replaced.
Use a suitable power distribution approach for the equipment installed. Follow the instructions supplied with the display, computer, amplifier, lighting and power components. The cabinet should have a clearly accessible master switch, and electrical work involving mains voltage should be handled according to local regulations by someone qualified to do so.
Heat needs a planned route through the cabinet. Electronic equipment should not be sealed in a small compartment without a way for warm air to leave and cooler air to enter. Vent openings should not be blocked when the cabinet is placed against a wall. Filters can reduce dust intake, but they also need regular cleaning. Never rely on decorative openings that do not create meaningful airflow.
Keep power supplies and exposed electrical connections away from areas where drinks, cleaning liquid or loose hardware could reach them. Before the first gaming session, inspect the cabinet for pinched cables, loose terminals, sharp edges and unstable components. Test the power system with the rear panel accessible, then disconnect power before making changes.
Test the cabinet in stages instead of waiting for completion
Testing should begin with the smallest working assembly. Connect the display and game system first, then test the control interface, audio and any lighting separately. Confirm that every button produces the intended input and that the joystick directions are not reversed. A control panel that looks correct can still have a wiring error hidden underneath.
- Test the screen with the intended signal source and check image proportions.
- Test each control individually, including start, menu and service inputs.
- Run several game types to identify layout problems that one title may not reveal.
- Check audio levels and confirm that speakers do not vibrate against the cabinet.
- Allow the electronics to operate long enough to identify heat buildup or unexpected shutdowns.
- Inspect the cabinet after moving it into its final position.
Invite different users to try the mock-up before applying the final finish. A tall adult, a shorter player and two people sharing the panel may notice different issues. The goal is not to copy a commercial cabinet exactly, but to create a stable and understandable setup for the people who will use it.
Make maintenance part of the design
A home arcade cabinet gathers dust in the control panel, around ventilation openings and behind the screen. Design access panels that can be removed without damaging the finish. Hinged sections, captive fasteners or clearly marked screws can reduce the time needed for routine checks. Avoid placing a fragile connector where it must be unplugged every time the cabinet is opened.
Keep spare components compatible with the original design. Extra buttons, a replacement joystick microswitch or a spare video cable can be useful, but storage should not become an excuse for an overcrowded cabinet. Label both ends of important cables and keep the wiring diagram inside a protected compartment.
Clean the screen according to its manufacturer’s instructions rather than applying an unsuitable household product. Dust the control panel with power disconnected, and check that no liquid can run through button openings. Periodically inspect bolts, mounting brackets and the stability of the cabinet, especially after moving it.
A thoughtfully designed cabinet can evolve. Leave some room for a replacement computer, a different display interface or an additional control module, but do not install unused hardware simply because the space is available. A simpler build is generally easier to understand, maintain and adapt.
Frequently asked questions
Is a wide screen suitable for classic arcade games?
Yes, provided the image is displayed at its intended proportions. Side borders are preferable to stretching a square or traditional arcade image across a wide panel. A bezel can make the unused space look deliberate.
Should a first build support two players?
Only if multiplayer is a genuine priority. Two-player controls require more panel width, more wiring and careful spacing. A single-player cabinet is often easier to build and can provide a clearer, less crowded layout.
Where should the service and menu buttons go?
Place them away from the main action buttons and joystick areas, while keeping them reachable for maintenance. They should not be easy to press accidentally during normal play.
Can a regular computer monitor be used?
It can be used if its dimensions, input connections, viewing angle, mounting points and image behavior suit the cabinet. Check access to the power button and make sure the display has adequate ventilation.
How can cabinet safety be checked?
Inspect stability, edge finishing, cable strain relief, ventilation, power connections and access to the master switch. Disconnect power before modifying internal wiring, and follow local electrical requirements for any mains-voltage work.
